Starting off & connecting the hardware: After unpacking the LPC2148 board connect a DC supply of 9V/1A to the DC jack to power the board. The LPC2148 board can also be powered through USB. 4: Programming LPC2148 Board: LPC2148 Board can be programmed through serial port UART "0" using "LPC2000 flash utility V2.2.2" is a freeware windows utility used to download the hex file format onto the LPC2148 Board. If your PC does not have a serial port; use a USB to serial converter to download the hex file. Programming LPC2148 Board through ISP. The LPC2148 Board can be programmed through ISP in two modes: 1. Auto Mode 2. Manual Mode
LPC214X is an evaluation board for LPC2148 ARM7TMDI based microcontroller
The LPC2148 microcontroller has 512KB of internal flash and 32+8K RAM. Following are the salient features of the board.
Power supply: DC 9V with power LED
On-board linear regulators generate +3.3V/500mA and +5v/500mA from power supply.
Extension headers for all microcontroller pins. RS232 connectors (2). PS/2 connector. JTAG connector.