20 Led Chaser Circuit Without Ic 555 | How To Build A Light Chaser Circuit Using Cd4017 And Cd4013

Author: Manikandan K J
This is a simple 20 led chaser circuit built using the decade counter ic CD4017 and Dual flip flop ic CD4013. CD4017 is wired as divide by 10 counter. One flip-flop of CD4013 is wired as multivibrator and another flip flop is wired as divide by 2 counter.
Output pin 2 from CD4013 is connected to the input 14 of CD4017. Pin 3 of decade counter is connected to the pin 11 of the dual flip flop ic. Output pins 12 and 13 are connected to the negative terminals of Leds. That is negative terminal of L1-L10 is connected to the 13th pin of U1 and L11-L20 is connected to the 12th pin of U1.
11th pin of U1 is triggered by 3rd pin of U2. That is, once it completes one cycle (3 to 11 of U1), it triggers the 11th pin of U2. This cycle repeats until the power is removed.
Parts Required:
Resistors: (1/4W)
R1 & R2 – 6.8K
R3 & R4 – 4.7K
C1 & C2 – 100uF (For more speed, reduce the value)
D1 & D2 -IN4148
U1 – Dual Flip-flop CD4013
U2 – Decade Counter CD4017
L1 – L20 – Any Colour
Power supply: 5V to 12V DC
General purpose PCB or Breadboard
20 led chaser circuit 20 led chaser circuit diagram 4017 ic circuit diagram cd4013 how to build a light chaser circuit how to make chaser lights how to make running led light control circuit

Check Also

Water Tank Overflow Alarm Circuit With Momentary Switch To Turn Off The Alarm

Author: Manikandan K J This circuit produces an audible alarm when the water level in …

Verified by MonsterInsights